Home » Products » Environmental Test Chamber » Salt Spray Corrosion Testing Equipment » Walk-in Salt Spray Test Room

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Walk-in Salt Spray Test Room

Cyclic corrosion testing is a more realistic salt spray test than traditional constant state exposure. Because actual outdoor exposures often involve both wet and dry environments, it makes sense to simulate these natural, periodic conditions for accelerated laboratory testing. The results show that after cyclic corrosion test, the relative corrosion rate, structure and morphology of the sample are similar to those of outdoor corrosion.
Availability:
Quantity:

Details:

Cyclic corrosion testing is a more realistic salt spray test than traditional constant state exposure. Because actual outdoor exposures often involve both wet and dry environments, it makes sense to simulate these natural, periodic conditions for accelerated laboratory testing. The results show that after cyclic corrosion test, the relative corrosion rate, structure and morphology of the sample are similar to those of outdoor corrosion. Therefore, cyclic corrosion testing is closer to true outdoor exposure than traditional salt spray methods. They can effectively evaluate many corrosion mechanisms, such as general corrosion, electrochemical corrosion and crevice corrosion.


Model number HJ-4 HJ-8 HJ-18
Studio size (L * W * H) mm 150 * 150 * 180 200 * 200 * 200 300 * 300 * 200
Overall dimensions (length * width * height) mm 180 * 190 * 260 230 * 240 * 280 330 * 340 * 300
Volume (cubic meter) 4 cubic meters 8 cubic meters 18 cubic meters
Salt tank capacity 100L 100L 100L
Laboratory temperature RT+10°℃~80℃
Laboratory humidity ≥85%R.H (controller display)
Pressure barrel temperature RT+10℃-80℃
PH (PH) PH=6.2-7.2 (NSS) /PH=3.0-3.2 (ACSS, CASS)
Brine concentration Sodium chloride solution concentration 5% (neutral salt spray)
Sodium chloride solution concentration 5%+ glacial acetic acid (acetic acid salt spray)
Sodium chloride solution concentration 5%+ glacial acetic acid +0.26g sodium chloride /L (copper accelerated salt spray)
Temperature uniformity ≤±1℃
Temperature fluctuation ≤±0.5℃
The amount of salt spray settling 1-3ml/h.80cm2 (collected for at least 16 hours and averaged)
Spray pressure 1.00 + / - 0.01 KGF/cm2
Spray method Continuous spray + intermittent spray
Heating method Interlayer air heating method
Control mode 7 inch LCD touch screen controller
Communication mode Two communication ports: USB and network port
power 6KW 9KW 12KW
Power source AC380V/50HZ AC380V/50HZ AC380V/50HZ


Product features:

1. Beautiful appearance, the whole molded by high temperature welding, corrosion resistance, easy to clean, no leakage phenomenon


2. Tower spray system, equipped with salt filter system, no crystallization nozzle, salt spray distribution, free adjustment of settlement


3. Continuous or periodic spray optional, the control panel has manual and touch screen control


4. All circuits are equipped with circuit breakers, and all heaters are equipped with electronic and mechanical overheat protection devices


谷歌通用图_01谷歌通用图_02谷歌通用图_03谷歌通用图_04







Hot tags: walk-in salt spray test room, walk-in salt spray corrosion test room, walk-in composite salt spray test room, walk-in corrosion test room, salt spray cycling test room (walk-in), walk-in salt spray environment laboratory, China, wholesale, low price, suppliers, for sale, factory, price, quotation

Previous: 
Next: 

Product Category

If you have any questions, please contact us via email or telephone and we will get back to you as soon as possible.

Miscellaneous information:

Copyright © Machine Co., Ltd.All Rights Reserved.| Sitemap