Home » Products » Environmental Test Chamber » Temperature Shock Test Equipment » Thermal Shock Chamber

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Thermal Shock Chamber

The air circulation system adopts dual motor horizontal circulation air supply mode, and the air circulation is uniform and efficient. The air source is driven by the circulating air supply motor (inverter) to drive the wind wheel (Φ230) through the electric heater, and the hot air is sent out, and then through the air duct to the inner chamber of the oven, and then the air after use is sucked into the air duct to become the air source for re-circulation and heating.
Availability:
Quantity:

Product Introduction:

The air circulation system adopts dual motor horizontal circulation air supply mode, and the air circulation is uniform and efficient. The air source is driven by the circulating air supply motor (inverter) to drive the wind wheel (Φ230) through the electric heater, and the hot air is sent out, and then through the air duct to the inner chamber of the oven, and then the air after use is sucked into the air duct to become the air source for re-circulation and heating. Ensure room temperature uniformity. When the temperature value swings due to the opening and closing action, the air supply circulation system can be quickly restored to the operating state temperature value.


Product Introduction: dimension temperature
HJ-64 D400*W400*H400mm Type C: RT+10~350 degrees, Type D: RT+10~450 degrees
HJ-150 D500*W500*H600mm Type A: RT+10-200 degrees, Type B: RT+10-250 degrees Type C: RT+10-350 degrees, type D: RT+10-450 degrees
HJ-240 D500*W600*H800mm
HJ-270 D500*W600*H900mm
HJ-480 D600*W800*H1000mm
HJ-672 D700*W800*H1200mm


Product features:

1, strong durability: because the electric heater is sealed in the box, the contact surface with the outside air is small, so it is not easy to be oxidized.


2, electrical control is safe, accurate and reliable: reasonable structure, large effective working area, full function, simple operation, easy maintenance and adjustment, low noise, high reliability, low cost, less energy consumption, high production efficiency.


3, internal heat cycle: baking objects are heated evenly.


Temperature control system:

1, temperature control instrument for PID digital display instrument, single point temperature control, automatic calculation, PV/SV display at the same time, key setting;


2, timer setting: 1 second -9999 time (optional setting hours, minutes, seconds) temperature to time, time to cut off the heating current (alarm device)


3, temperature sensing line (K) type;


4, signal output is 3-32V;


5, heating control: solid-state relay SSR no contact;


6, the heating element is: high temperature heating tube;


7, temperature range: RT+20 ~ 200℃;


8, heating rate: 100℃ for about 15 minutes


9, control accuracy: ±1.0℃;


10, display accuracy: 0.1℃;


11, temperature deviation distribution uniformity: ±2.5℃. (no-load test)


谷歌通用图_01谷歌通用图_02谷歌通用图_03谷歌通用图_04







Hot tags: thermal shock chamber, cold and hot cycle impact test chamber, high and low temperature impact test chamber, cold and hot temperature impact test chamber, cold and hot shock test box, cold and hot shock testing machine, high and low temperature cold and thermal shock test chamber, fast temperature shock box, fast temperature shock chamber, China, wholesale, low price, suppliers, for sale, factory, price, quotation

Previous: 
Next: 

Product Category

If you have any questions, please contact us via email or telephone and we will get back to you as soon as possible.

Miscellaneous information:

Copyright © Machine Co., Ltd.All Rights Reserved.| Sitemap