 |
| Quantity: | |
|---|---|
It can be used for impact testing of test products, mainly for small specimens for higher impact acceleration tests to assess the degree of impact damage the specimens can withstand. It is often used in impact tests in aerospace, ships, weapons, electronics, automobiles, home appliances and transportation, electronic components, electronic circuit boards and other fields.
| Rated load(kg) | 50 (including fixtures, test parts, sensors, etc.) | ||||||
| Impulse waveform | Half sine wave | ||||||
| Driving mode | Fully automatic pneumatic drive | ||||||
| Peak acceleration | 100~1000m/s2 | ||||||
| Pulse duration | 30~3ms | ||||||
| Table size (L × W) | 700mm×500mm | ||||||
| Maximum collision frequency (times/min) | 80 | ||||||
| Total weight of equipment (kg) | About 1200 | ||||||
| Power source | 380VAC±10% 50Hz | ||||||
| Environmental condition | Temperature (℃) | ≤0.8 (User's own industrial air source or air compressor, air compressor 1.2m2/min, air compressor flow will affect the maximum frequency of the equipment) | |||||
| Humidity (25℃) | |||||||
| Stable Air Supply (MPa) | |||||||
It can be used for impact testing of test products, mainly for small specimens for higher impact acceleration tests to assess the degree of impact damage the specimens can withstand. It is often used in impact tests in aerospace, ships, weapons, electronics, automobiles, home appliances and transportation, electronic components, electronic circuit boards and other fields.
| Rated load(kg) | 50 (including fixtures, test parts, sensors, etc.) | ||||||
| Impulse waveform | Half sine wave | ||||||
| Driving mode | Fully automatic pneumatic drive | ||||||
| Peak acceleration | 100~1000m/s2 | ||||||
| Pulse duration | 30~3ms | ||||||
| Table size (L × W) | 700mm×500mm | ||||||
| Maximum collision frequency (times/min) | 80 | ||||||
| Total weight of equipment (kg) | About 1200 | ||||||
| Power source | 380VAC±10% 50Hz | ||||||
| Environmental condition | Temperature (℃) | ≤0.8 (User's own industrial air source or air compressor, air compressor 1.2m2/min, air compressor flow will affect the maximum frequency of the equipment) | |||||
| Humidity (25℃) | |||||||
| Stable Air Supply (MPa) | |||||||
