Home » Products » Environmental Test Chamber » Sand And Dust Protection Testing Equipment » Dust Blowing Test Chamber

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Dust Blowing Test Chamber

The equipment is driven by a high-power fan to blow a certain concentration of sand dust over the surface of the test sample at a certain flow rate, so as to evaluate the ability of these test samples (equipment) to prevent the penetration effect of dust particles under the action of dry sand or dusty atmosphere, the ability to prevent the abrasive or blocking effect of sand gravel, and the ability to store and run.
Availability:
Quantity:

Details:

The equipment is driven by a high-power fan to blow a certain concentration of sand dust over the surface of the test sample at a certain flow rate, so as to evaluate the ability of these test samples (equipment) to prevent the penetration effect of dust particles under the action of dry sand or dusty atmosphere, the ability to prevent the abrasive or blocking effect of sand gravel, and the ability to store and run. At the same time, it can simulate the dust environment of low concentration and low wind speed. The target equipment can well simulate the high-temperature bonding problem of the equipment or coated sample under the high-temperature and dusty atmosphere. The data can be accurately read in various regional positions (air duct inlet, sample surface, front and back walls, left and right walls, pipes), and the temperature can be adjusted in real time according to demand; Special production of wind speed, flow rate, furnace lighting, fire viewing hole, and heating element using resistance wire, and can test the resistance wire project bonding, furnace lining and air supply pipeline all do insulation treatment.


Studio size 500mm(W)x600mm(H)x600mm(D)
Carton size Approx. 2200mm(W) x 1750mm(H) x 950mm(D) (subject to actual design)
door Full open single door type, the door is provided with an observation window
Studio temperature RT+20℃~+550℃ adjustable
Temperature equalization ≤Plus or minus 20 ℃
Time control Automatic timing control, time control accuracy 1min.
Panel display The temperature and time of the laboratory can be recorded.
Test cross-sectional area The cross-sectional area of sand blowing test is 600×600mm
Temperature control The circulating air duct is equipped with a heater
Dust air circulation device Circulating air duct and high power mixed flow fan
Safety protection measure Ground protection device; Power undervoltage, leakage protection; Motor overload protection; Blast motor overload protection; The system has a safety interlock
Housing material High strength double-sided galvanized steel plate with surface powder baking paint
Inner box material Light fire brick
Mode of operation The speed of the motor is adjusted by the frequency converter, so as to adjust the wind speed of the whole device and achieve the wind speed required by the experiment


Features:


1. The equipment is a whole frame (rotary) structure, the test box is located in the middle of the equipment, the fan is in the rear of the equipment, the rotary circulation air duct is connected to the test device, the sand inlet device is in the upper tuyere of the test box, the temperature control and dehumidification system is located in the lower part of the box, the instrument control system is located in the left below the test box.


2. The circulating air duct is equipped with heater, dehumidification device, etc.


3. The door is provided with an observation window. The test chamber has a single door and adopts double high temperature sealing.


4. The outer wall material of the test box and rotary air duct is cold-rolled steel plate after anti-rust treatment, the inner wall is light fireproof brick, and the frame is 5# channel steel after anti-rust treatment.(The overall shell of the equipment is optional)


5. The control adopts intelligent controller (display includes: outlet, return air outlet and box)


6. Sand and dust air circulation device: circulation duct and high-power mixed-flow fan.


7. Meet: blowing dust flow dust test


谷歌通用图_01谷歌通用图_02谷歌通用图_03谷歌通用图_04







Hot tags:dust blowing test chamber, sand and dust blowing test chamber, dust detection and blowing test chamber, dust prevention test cabinet, military standard dust blowing and sand blowing test box, wind blown dust test chamber, ip5 dust blowing test chamber, ip56 level dust density test box, China, wholesale, low price, suppliers, for sale, factory, price, quotation

Previous: 
Next: 

Product Category

If you have any questions, please contact us via email or telephone and we will get back to you as soon as possible.

Miscellaneous information:

Copyright © Machine Co., Ltd.All Rights Reserved.| Sitemap