Home » Products » Leather Testing Equipment » DIN sole wear testing machine

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

DIN sole wear testing machine

The testing machine under the specified contact pressure and a given area, the sample and sandpaper into a certain Angle, the test sample in a certain level of sandpaper friction and wear. The sandpaper is attached to the surface of the drum, and the sample is pressed against the drum with sandpaper, so that the sample moves horizontally along the drum. The wear is generated at one end of the cylindrical specimen, the mass loss of the specimen is measured, and the volume wear is calculated from the density of the specimen. It is suitable for abrasion measurement of elastic materials, rubber, tires, conveyor belts, soles, soft synthetic leather, leather and other materials. It has the characteristics of high efficiency, good reproducibility and easy operation.
Availability:
Quantity:

Applicable scope:

The testing machine under the specified contact pressure and a given area, the sample and sandpaper into a certain Angle, the test sample in a certain level of sandpaper friction and wear. The sandpaper is attached to the surface of the drum, and the sample is pressed against the drum with sandpaper, so that the sample moves horizontally along the drum. The wear is generated at one end of the cylindrical specimen, the mass loss of the specimen is measured, and the volume wear is calculated from the density of the specimen. It is suitable for abrasion measurement of elastic materials, rubber, tires, conveyor belts, soles, soft synthetic leather, leather and other materials. It has the characteristics of high efficiency, good reproducibility and easy operation.

Profile size(LXWXH) 70×30×30cm
Test load10N plus or minus 0.2N
Test piece size16mm, 6~15mm (D)
Fixture load2.5 N
The weight is heavy2.5N, 5N
Lateral displacement of fixture4.2±0.04mm/ roller per turn
Roller diameterΦ(150 ±0.2)mm
Roller length460mm
Roller speed40±1r.p.m
Wear stroke40m(20m) equivalent to roller ring 84(42)
Wear rate0.32 m/SEC
Dip Angle3° (Angle between test piece support shaft and roller vertical plane)
Power supply1, AC220V, 2.6A
Weight (approx)It's about 61kg


Previous: 
Next: 

Product Category

If you have any questions, please contact us via email or telephone and we will get back to you as soon as possible.

Miscellaneous information:

Copyright © Machine Co., Ltd.All Rights Reserved.| Sitemap